Structural integrity
Research
TA4 Materials (such as high strength steels, ship steels, concrete, cold climate effects etc)
These reports are made available by the Health and Safety Executive as part of a series of reports of work which has been supported by funds provided by the Executive. Neither the Executive, nor the contractors assume any liability for the reports nor do they necessarily reflect the views of the Executive.
- RR105 Review of the performance of high strength steels used offshore
- RR129 Review of external stress corrosion cracking of 22%Cr duplex stainless steel Phase 1 - Operational data acquisition
- RR131 Long-term testing of composite through-thickness properties
- RR191 Integrity of Repaired Welds (Phase 1) - Deliverable 5 Summary Report
- RR207 Review of low cycle fatigue resistance
- RR224 Growth of through-wall fatigue cracks in brace members
- RR298 Chloride stress corrosion cracking of duplex stainless steels in the absence of oxygen
- RR520 Damage modelling of large and small scale composite panels subjected to a low velocity impact
- RR643 Assessing and modelling the uncertainty in fatigue crack growth in structural steels
- OTH240 The assessment of impact damage caused by dropped objects on concrete offshore structures
- OTH283 Part 1 Grouted and mechanical strengthening and repair of tubular steel offshore structures
- OTH283 Part 2 Grouted and mechanical strengthening and repair of tubular steel offshore structures – Engineering assessment of test data
- OTH298 Scaling of underwater concrete repair materials
- OTH351 Hydrogen cracking of legs on Jack-up drilling rigs
- OTH364 Long term durability of grouts in marine environments
- OTH365 A review of the ultimate strength of tubular framed structures
- OTH390 Background to new fatigue guidance for steel joints and connections in offshore structures
- OTH392 A survey of some recent corrosion fatigue tests on welded joints in steel plate
- OTH427 Influence of geometry on the strength of T-butt joint
- OTH482 A review of residual stress distribution in welded joints for the defect assessment of offshore structures
- OTH489 Literature review of fracture properties of grade A ship plate
- OTH497 The ultimate strength of cracked tubular K-joints
- OTH511 A review of fatigue cracked growth rates in air and seawater
- OTH532 A review of the corrosion fatigue behaviour of structural steels in the strength range 350-900MPa and associated high strength weldments
- OTH554 Assessment of fracture strength of cracked tubular joints
- OTH555 A review of the effects of sulphate reducing bacteria in the marine environment on the corrosion fatigue and hydrogen embrittlement of high strength steels
- OTH562 Static strength of high strength steel tubular joints
- OTO 89 003 Influence of geometry on the fatigue strength of T-butt joints
- OTO 94 702 Effect of cathodic protection on the fatigue strength of tubular joints in Seawater
- OTO 94 804 Fatigue of welded joints under variable amplitude loading
- OTO 95 952 The influence of welding on the performance of high strength steels offshore
- OTO 95 954 Implications of proposed changes to the post-weld heat treatment requirements for structural steels on the HSE guidance document for offshore installations
- OTO 96 030 A review of adhesive bonding for offshore structures
- OTO 96 040 Review of long term variable amplitude corrosion fatigue data
- OTO 96 050 Guidance for concrete structures
- OTO 96 709 HAZ toughness of thick section steel - Final report
- OTO 96 710 Critical examination of correlations between fracture toughness and Charpy impact energy
- OTO 96 712 Hydrogen induced stress corrosion cracking of welded low carbon steel
- OTO 96 901 Composite materials for use offshore
- OTO 96 902 Fatigue crack growth research
- OTO 96 903 Marine research review 9 - The question of high yield to ultimate strength ratio for high strength steel
- OTO 97 053 The durability of prestressing components in offshore concrete structures
- OTO 97 054 Engineering properties of high strength lightweight concrete
- OTO 97 065 The corrosion fatigue behaviour of high strength and associated high strength weld metals
- OTO 97 066 A review of DRA work on marine strength steels
- OTO 97 067 Fatigue tests on steel bolts
- OTO 97 072 Data surveys of Hydrogen assisted cracking in high strength jack-up steels
- OTO 98 044 Stress concentrations in single-sided welds in offshore tubular joints
- OTO 98 091 Further assessment of high strength steel weld metals for use in offshore engineering applications
- OTO 99 014 Weld toe magnification factors for semi-elliptical cracks in T-butt joints
- OTO 99 018 The behaviour of carbon steels at high strain rates and strain limits
- OTO 99 022 Fatigue life implications for design and inspection for single sided welds at tubular joint
- OTO 99 054 Static strength of cracked tubular joints: New data and models
- OTO 99 056 A review of the effects of microstructure on the hydrogen embrittlement of high strength offshore steels
- OTO 99 058a Fatigue curves for welded joints in air and sea under variable amplitude loading
- OTO 99 058b Fatigue curves for welded joints in air and sea under variable amplitude loading – Results
- OTO 99 081 Ultimate strength performance of offshore structural framing
- OTO 00 001 Fracture properties of grade 'A' ship plate
- OTO 00 077 Fracture mechanics assessment of fatigue cracks in offshore tubular structures
- OTO 00 078 Static strength of cracked high strength steel tubular joints
- OTO 00 088 Modelling failure of welded connections to corrugated panel structures under blast loading
- OTO 01 015 Steel
- OTO 01 017 Materials other than steel and concrete
- OTO 01 020 Elevated temperature and high strain rate properties of offshore steels
- OTO 01 046 Concrete
- OTO 01 074 Deterioration and spalling of high strength concrete under fire
- OTO 01 079 Variable amplitude corrosion fatigue of jack-up steels
- OTO 01 080 The static strength of cracked joints in tubular members
- OTO 01 081 Experimental validation of the ultimate strength of brace members with circumferential cracks
- OTO 01 082 Comparison of tubular joint strength provisions in codes and standards
- OTO 01 083 Comparison of fatigue provisions in codes and standards
- OTO 01 084 Comparison of tubular member strength provisions in codes and standards
- OTI 92 602 The effects of high strain rates on material properties
- OTI 92 604 Experimental data relating to the performance of steel components at elevated temperature
- OTI 92 605 Methodologies and available tools for the design/analysis of steel components at elevated temperatures
- OTI 92 611 The effect of bacterial activity on North sea concrete