files in this series:

• P0 - Advice for managers [44kb]
• P1 - Manual film and plate development [60kb]
• P2 - Automated film and plate development [71kb]
• P3 - Ink mixing [56kb]
• P4 - Printing with conventional inks [60kb]
• P5 - Manual cleaning of presses (conventional inks) [50kb]
• P6 - Automated cleaning of presses (conventional inks) [63kb]
• P7 - Printing with UV-curable inks and coatings [67kb]
• P8 - Manual cleaning of presses (UV-curable inks and coatings) [66kb]
• P9 - Automated cleaning of presses (UV-curable inks and coatings) [67kb]
• P10 - Printing with cold-set inks [60kb]
• P11 - Manual cleaning of presses (cold-set inks) [63kb]
• P12 - Automated cleaning of presses (cold-set inks) [63kb]
• P13 - Printing with heat-set inks [60kb]
• P14 - Manual cleaning of presses (heat-set inks) [63kb]
• P15 - Automated cleaning of presses (heat-set inks) [63kb]
• P16 - Using isocyanate based adhesives in frame-making [142kb]
• P17 - Stencil generation [71kb]
• P18 - Ink mixing and colour matching [56kb]
• P19 - Printing with lower-volatility inks and rack drying [61kb]
• P20 - Printing with higher-volatility inks and extracted rack drying [66kb]
• P21 - High-volume printing with oven drying [68kb]
• P22 - Printing with UV-curable inks [64kb]
• P23 - Printing with isocyanate-based inks [127kb]
• P24 - Manual screen reclamation [69kb]
• P25 - Automated screen reclamation [63kb]
• P26 - Ink mixing [74kb]
• P27 - Printing [70kb]
• P28 - On-press cleaning [82kb]
• P29 - Manual off-press cleaning [76kb]
• P30 - Automated off-press cleaning [77kb]
• P31 - Making photopolymer plates [59kb]
• P32 - Mixing solvent-borne inks [75kb]
• P33 - Printing with solvent-borne inks [67kb]
• P34 - Mixing UV-curable inks [57kb]
• P35 - Printing with UV-curable inks [69kb]
• P36 - On-press cleaning [84kb]
• P37 - Manual off-press cleaning [76kb]
• P38 - Automated off-press [71kb]
• P39 - Wide-format printing with solvent-borne inks [56kb]
• P40 - Wide-format printing with UV-curable inks [61kb]
• P41 - Grande-format printing [64kb]
• P42 - Mixing and transferring isocyanate-based adhesives [146kb]
• P43 - Using isocyanatebased adhesives [176kb]
• P44 - Drying and curing isocyanate-based adhesives [135kb]
• P45 - Health surveillance for occupational dermatitis [40kb]
• P46 - Health surveillance for occupational asthma [39kb]
• P47 - Biological monitoring for isocyanates [39kb]
• P48 - Selection and use of RPE: Protection Factor 10 [44kb]
• P49 - Selection and use of RPE: Protection Factor 20 [43kb]
• P50 - Selection and use of RPE: Protection Factor 40 [43kb]