There is no set way of undertaking a risk assessment but the simplest and most straightforward way is to consider our publication Five steps to risk assessment. This document outlines the steps for a risk assessment in simple terms, and it will help you focus on the risks that really matter in your workplace.
You can find more information on the HSE Risk Assessment website.
Working platforms or 'cages' on forklift trucks are 'non-integrated', i.e. the forklift driver controls the movement of the truck including the cage. There are no controls in the cage to control the truck or cage movement.
The use of non-integrated platforms for planned work is not generally allowed as there is now other purpose-built access equipment, such as the wide variety of mobile elevating work platforms (MEWPs), which are better suited to carrying out work at heights and which offers a higher level of safety for the person using the platform. These are readily available for hire.
Non-integrated platforms can be used for occasional use. Some examples of occasional use are as follows;
You can read more on this topic in guidance note PM28 Working platforms (non-integrated) on forklift trucks.
More information about the MAC is available on the MAC website. The MAC charts help to identify high-risk manual handling activities. They were made available to HSE and local authority inspectors in November 2002, and the general public in August 2003. They are suitable for use by employers, employees and their representatives.
The law does not include maximum weight limits. The main legal requirements require avoidance or control of risk. HSE does not recommend weight limits. The Manual Handling Operations Regulations (MHOR) guidance gives basic guideline figures for lifting and lowering which indicate when a more detailed risk assessment should be carried out.
Slip and trip accidents increase during the Autumn and Winter season for a number of reasons: there is less daylight, leaves fall onto paths and become wet and slippery and cold weather spells cause ice and snow to build up on paths. There are effective actions that you can take to reduce the risk of a slip or trip. Regardless of the size of your site, always ensure that regularly used walkways are promptly tackled.
More information is available in our slips and trips in icy conditions and winter weather section.
Work is still being done on trying to properly understand the performance and properties of these ‘profiled’ floor surfaces, but it is becoming clear that they often do not have the slip resistance qualities that people expect. Metal chequer plate is in widespread use such as on steps, gantries, vehicles and mobile work equipment. Experiences in practice indicate that metal profiles can be particularly slippery when wet. It is believed that the slipperiness of profiled metal surfaces is more closely linked to the surface microroughness of the top surface of the cleats (often very low microroughness) than any attributes of the cleat pattern, size and depth.
Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995 (RIDDOR), puts duties on employers, the self-employed and people in control of work premises (the Responsible Person) to report serious workplace accidents, occupational diseases and specified dangerous occurrences (near misses).
Extensive guidance on how and what to report is found on the HSE RIDDOR website.
These reports enable the enforcing authorities (either the HSE or Local Authority) to identify where and how risks arise and to investigate serious incidents and trends.
As well as a legal requirement to report such incidents, internal investigation by your organisation can assist you to: