OTO report index: 1996
Report numbers
1 - 50
- 96:002 Quality assurance of HAZOP
- 96:003 Effective Shift Handover -A Literature Review
- 96:007 Review of current free-fall lifeboat literature and recommendations for needed research and development
- 96:009 Ocean odyssey emergency evacuation. Analysis of survivor experiences
- 96:010 Recovery and pick-up following emergency evacuation
- 96:016 Selection and summary of significant storm events in UK waters
- 96:018 Improved reliability of mooring chain systems
- 96:020 North Sea seventy assessment
- 96:022 Safety evaluation of the design of thin-walled foundation piles
- 96:025 The wave spreading factor in UK waters
- 96:027 An assessment of the reliability of the mooring systems of mobile offshore units for close proximity applications
- 96:028 An assessment of the reliability of the mooring systems of mobile offshore units for close proximity applications: Phase II Further analysis
- 96:030 A review of adhesive bonding for offshore structures
- 96:033 A review of available laboratory test data on mooring chain applications
- 96:034 Corrosion fatigue of AP1 5L grade X85 welded tubular joints with applied cathodic protection of -1000mV (Vs Ag/AgCI) *
- 96:035 Breaking waves
- 96:039 Report specification for offshore technology reports
- 96:040 Review of long term variable amplitude corrosion fatigue data
- 96:041 Offshore lifting and Handling Appliances
- 96:042 Finalisation of ship/platform collision incident report (1995)
- 96:045 Radio operator competency **
- 96:048 Characterisation of the laboratory-scale yet fire around 203-mm inside diameter tubular geometries
- 96:049 A comparative study of risk perception and safety in UK and Norwegian offshore personnel
- 96:050 Guidance for concrete structures: background report
51 - 100
- 96:051 Man overboard
- 96:054 Validation of the jet fire resistance test procedure: large scale jet fire tests on fire protected tubular members
- 96:055 Validation of the jet fire resistance test procedure: large scale jet fire tests on fire protected I-section beams
- 96:056 Validation of the jet fire resistance test procedure: additional measurements
- 96:057 Repairs to offshore installations: background to Section 60 of the guidance notes
100+
- 96:703 Smoke hoods for offshore use - performance requirements
- 96:707 UK Prod trials **
- 96:709 HAZ toughness of thick section steels - final report
- 96:710 Critical examinations of correlations between fracture toughness and charpy impact energy
- 96:712 Hydrogen induced stress corrosion cracking of welded low carbon steel
- 96:801 Development of decompression procedures: based upon integrated analytic models of tissue gas bubble dynamics and oxygen tolerance. Phases II and III
- 96:901 Composite materials for offshore use
- 96:902 Fatigue crack growth research
- 96:903 Marine Research Review 9: the question of high yield to ultimate strength ratio for high strength steel
- 96:905 Marine Research Review 11: drag and inertia coefficient data for circular cylinders
- 96:951 An examination of the number and frequency of serious dropped object and swinging load incidents involving cranes and lifting devices an offshore installations for the period 1981-1995
- 96:953 Investigation into possible contributory factors to decompression sickness in commercial air diving and the potential long-term neurological consequences
- 96:954 Offshore hydrocarbon releases statistics, 1996 (for the periood 1.10.92 to 31.3.96 inclusive)
- 96:955 Offshore accident and incident statistics report. 1996 (provisional data)
These Offshore Safety Reports are saved as PDF documents. Some of these documents are very large, please see the key below for guidance.
* Denotes a document larger than 2MB.
** Denotes a document larger than 5MB.
For further information about typical download times for PDFs please see the FAQ pages.