Diving

• Are you involved in a diving project at work?
• Guidance for appointed doctors on the Work in Compressed Air Regulations 1996
• Commercial shellfish diving in inshore water: Diving at Work Regulations 1997

Diving information sheets

• General diving hazards Diving Information Sheet No. 1
• Diving system winches Diving Information Sheet No. 2
• Breathing gas management Diving Information Sheet No. 3
• Compression chambers Diving Information Sheet No. 4
• Exposure limits for air diving operations Diving Information Sheet No. 5

• Maintenance of diving bell hoist ropes
  Diving Information Sheet No. 6
  This has been replaced by IMCA document Guidelines on wire rope integrity management for vessels in the offshore industry (IMCA SEL 022/M 194)

• Bell run and bell lock out times Diving Information Sheet No. 7
• Diving in benign conditions, and in pools, tanks, aquariums and helicopter underwater escape training Diving Information Sheet No. 8
• Divers' breathing air standard and the frequency of tests Diving Information Sheet No. 9
• Diving cylinders: Guidance on internal corrosion, fitting valves and filling Diving Information Sheet No. 10
• Diving cylinders: Guidance on their manufacture, inspection and carriage Diving Information Sheet No. 11
• Cleaning of diving equipment Diving Information Sheet No. 12
• Differential pressure hazards in diving Diving Information Sheet No. 13
• The noise exposure of working divers Diving Information Sheet No. 14