HSE Prosecution System

Last Updated: 19 October 2000

Version: P1.0

 

Advanced Search - Example 7

Help Overview | Advanced Search Overview

Example 7 -  Find Breaches of a specific Act, where the defendant was found "Guilty with Fine" OR "Guilty with Imprisonment" (Uses three search criteria including "OR")

Use the following steps:-

1    On the Home Page, click on Advanced Search

Add your 1st criteria to the search

2    In the Cases or Breaches  box select Breaches

3    Click on Continue

4    In the Search Item box select Act

5    Click on Continue

6    In the Act list, select "Health and Safety At Work Act, 1974

7   Click on Add.

Please Note:

In the Current Search Criteria area, "Searching for Breaches where Act = Health and Safety At Work Act, 1974 " is displayed.  If you wish to see the results using only this criteria, then click on Go now.  Click the Back button on the Toolbar to return to your search.

Add your 2nd criteria to the search

8    In the Additional criteria condition box select AND.

9    Click on Continue.

10  In the Search Item box, select result

11  Click on Continue.

12  In the Result  box select Guilty Fine

13  Click on Add.

Please Note:

In the Current Search Criteria area, "Searching for Breaches where Act = Health and Safety At Work Act, 1974" AND "Result = Guilty Fine" are displayed.  If you wish to see the results using only this criteria, then click on Go now.  Click the Back button on the Toolbar to return to your search.

Add your 3rd criteria to the search

14  In the Additional criteria condition box select OR.

15  Click on Continue.

16  In the Search Item box, select result

17  Click on Continue.

18  In the Result  box select Guilty Imprisonment

19  Click on Add.

Please Note:

In the Current Search Criteria area, "Searching for Breaches where Act = Health and Safety At Work Act, 1974 " AND "Result = Guilty Fine" OR "Result = Guilty Imprisonment" are displayed.  If you wish to see the results using only this criteria, then click on Go now.  Click the Back button on the Toolbar to return to your search.

 

 

Add your 4th criteria to the search

20  In the Additional criteria condition box select AND.

21  Click on Continue.

22   In the Search Item box select Act

23   Click on Continue

24   In the Act list, select "Health and Safety At Work Act, 1974

25   Click on Add.

 

 

26  Within the Current Search Criteria area, check that all the search criteria are listed as follows:-

Searching for Breaches where -

"act = Health and Safety At Work Act, 1974

AND "result = Guilty Fine

OR "result = Guilty Imprisonment

AND "act = Health and Safety At Work Act, 1974

 Tip:-

If you see a mistake, you can either click on Start Again, which clears all the search criteria or use the Back button on the Toolbar to move back a step at a time.

27   In a few moments, a hit list of Breaches of the Health and Safety At Work Act, 1974 where the result was either Guilty Fine or Guilty Imprisonment, is displayed. 

28  Click on the Breach Number to view the Breach in more detail.  E.g. Hearing Date, Court Name, Result, Fine etc.

29  Use the Back button on the Toolbar, to return to the list of Breaches

Please Note:

If there is more than one Breach associated with the Case a 'next' or 'back' button will appear  beside the Case Number - click this to view each Breach in turn OR alternatively, click on the link 'Other Breaches in this case'

Top of Page