HSE Prosecution System

Last Updated: 19 October 2000

Version: P1.0

 

Advanced Search - Example 3

Help Overview | Advanced Search Overview

Example 3 - Find Cases resulting from the investigation of a fatality, where the total fine was at least 1000.00 (Uses two search criteria including amounts) 

Use the following steps:-

1    On the Home Page, click on Advanced Search

Add your 1st criteria to the search

2    In the Cases or Breaches  box select Cases

3    Click on Continue

4    In the Search Item box, select Resulting from a Fatality

5    Click on Continue.

6    In the Yes or No Box, Select Yes.

7    Click on Add.

Please Note:

In the Current Search Criteria area, "resulting from a fatality = Yes" is displayed.  If you wish to see the results using only this criteria, then click on Go now.  Click the Back button on the Toolbar to return to your search.

 

 

Add your 2nd criteria to the search

8    In the Additional criteria condition box select AND.

9    Click on Continue.

10  In the Search Item box, select Total Fine.

11  Click on Continue.

12  In the Enter the Total Fine  operand list, select ">" and enter "999.99" into the blank field.   See Operand or Condition for more details on how to use the operands with amounts.

13  Click on Add.

14   Within the Current Search Criteria area, check that all the search criteria are listed as follows:-

Searching for Cases where -

          "resulting from a fatality = Yes"

AND "total fine > 999.99". 

 Tip:-

If you see a mistake, you can either click on Start Again, which clears all the search criteria or use the Back button on the Toolbar to move back a step at a time.

15  Click on Go within the "Current Search Criteria" area to start the Search and find the Results.

16   In a few moments, a hit list of Cases resulting from the investigation of a fatality, where the fine was at least 1000.00. is displayed. 

17  Click on the Case Number to view the Case in more detail E.g. Offence Date, Total Fine, Location of Offence and HSE Details.

18  Use the Back button on the Toolbar, to return to the list of Cases

Top of Page