Scissor lift safety warning following fatal overturns

Date:

5 January 2011

Users of certain types of scissor lifts are being advised to make daily safety checks after five people were killed in three separate incidents when they overturned.

A safety alert has been issued by the Health and Safety Executive (HSE) to warn service and maintenance engineers and those in the construction industry who use, or lease out, JLG 500RTS and 400 RTS scissor lifts, to ensure that safety critical components are working correctly.

In all three fatal overturn incidents in Europe over the past four years:

• the oscillating axle which allows the machine to be driven on uneven ground with the platform in the transport position failed to lock when the platform was raised.
• the lift/drive interlock system did not work allowing the platform to be elevated above 6.7m without the stabilisers being deployed.

Owners of both these types of scissor lifts are being advised to ensure that the oscillating axle lockout system and the lift/drive cut out switches are checked for correct functioning (in accordance with the manufacturer's recommendations) before the machine is next used and that users complete daily inspections and function testing of both elements.

Said HSE inspector Richard Clarke:

"Though this safety alert is primarily to warn those who own and use these specific models of scissor lift, and those with similar interlock systems, it should serve as a reminder to all users of mobile elevating work platforms that there is a need to regularly maintain, inspect and test the equipment. This isn't just recommended by manufacturers but is also required by law.

"Used as directed and with all the necessary checks, we continue to recommend the appropriate use of mobile elevating work platforms as a tool to enable work at height to be carried out safely."

The safety alert can be viewed in full at http://www.hse.gov.uk/safetybulletins/scissorlifts.htm

Notes to editors

1. The Health and Safety Executive is Britain's national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice; promoting training; new or revised regulations and codes of practice; and working with local authority partners by inspection, investigation and enforcement. www.hse.gov.uk
2. HSE Safety Bulletins are released to keep industry up to date with failures in equipment, process, procedures and substances used in the workplace, and are gathered from investigations, inspections, research, advice from industry and the EU Commission.
3. There are three types of bulletin:
   1. Alert - immediate and crucial
   2. Notice - not immediate but within a defined timescale
   3. Other information - any other information that HSE comes across through its normal activities that needs to be passed on either to a wide audience, or to a specific group or sector of industry

Press enquiries

All enquiries from journalists should be directed to the HSE Press Office