Plumber given community service for putting people's lives at risk

Date:

5 December 2011

Release No:

HSE-e-47

An Ipswich plumber who put lives at risk by illegally working on gas appliances has been awarded 100 hours of community service.

Andrew Davies, 44, of Tower Mill Road, Ipswich, admitted breaching safety regulations when he appeared at Ipswich Magistrates' Court today.

A joint investigation by environmental health officers from Ipswich Borough Council and Gas Safe found Mr Davies carried out work on gas fittings and appliances at the Kwan Thai restaurant in Saint Nicholas Street, Ipswich in July 2010 without being registered to do so, a legal requirement for carrying out such work. Mr Davies falsely issued the restaurant owners with a safety record bearing an invalid registration number.

The piece of work carried out by Mr Davies at the restaurant was judged by a qualified engineer to be so dangerous it represented "an immediate danger to life or property."

The Health and Safety Executive (HSE) served a Prohibition Notice on Mr Davies on 9 March 2011 which stopped him from carrying out any further gas work until such time as he obtained registration from GasSafe.

Mr Davies pleaded guilty to breaching Section 3 (2) of the Health and Safety at Work etc Act 1974 and Regulation 3 (3) of the Gas Safety (Installation & Use) Regulations 1998. Along with 100 hours of community service, he was ordered to pay £3,527.50 costs.

HSE Inspector Ivan Brooke said:

"It is against the law for anyone who is not registered with Gas Safe to carry out work on a gas appliance. When unqualified workers try to bypass the law in this way they are not only putting themselves at risk of prosecution, and potentially a large fine or a spell in prison - they are also putting their customers' lives at risk.

"Working with gas appliances is difficult, specialised and potentially very dangerous. Only engineers who are qualified and registered should attempt it.

"HSE will not hesitate to prosecute those who break the law in this way."

Paul Johnston, Chief Executive of Gas Safe Register added:

"If you're employing an engineer to fit, fix or service gas appliances, you should always make sure that person is Gas Safe registered. If they say they are, don't just take their word for it. Check they are on the Gas Safe Register and check their ID card when they arrive at your door.

"You shouldn't take any risks, badly fitted and poorly serviced gas appliances can cause fires, explosions, gas leaks and carbon monoxide poisoning."

Notes to editors

1. The Health and Safety Executive is Britain's national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice; promoting training; new or revised regulations and codes of practice; and working with local authority partners by inspection, investigation and enforcement. www.hse.gov.uk
2. Section 3 (2) of the Health and safety at Work etc Act 1974 states: "it shall be the duty of every self-employed person to conduct his undertaking in such a way as to ensure, so far as is reasonably practicable, that he and other persons (not being his employees) who may be affected thereby are not thereby exposed to risks to their health and safety."
3. Regulation 3 (3) of the Gas Safety (Installation & Use) Regulations 1998 states: "No employer shall allow any of his employees to carry out any work in relation to a gas fitting or service pipework and no self-employed person shall carry out any such work, unless the employer or self-employed person, as the case may be, is a member of a class of persons approved for the time being by the Health and Safety Executive."
4. Badly fitted and poorly serviced gas appliances can cause fires, explosions, gas leaks and carbon monoxide poisoning - always use a Gas Safe registered engineer to fit, fix and service gas appliances.
5. Gas Safe Register is the Government approved registration scheme for gas engineers in the UK, Isle of Man and Guernsey. The register of 126,000 gas engineers, aims to protect 21 million gas consumers from dangerous gas work. It is a legal requirement for any gas engineering business or self employed gas engineer carrying out domestic or commercial gas work to be registered under the Gas Safety (Installation & Use) Regulations 1998.
6. Gas Safe Register replaced the CORGI gas registration scheme in Great Britain and Isle of Man on 1 April 2009 and in Northern Ireland and Guernsey on 1 April 2010.
7. To find or check a Gas Safe Registered engineer in your area, go to www.GasSafeRegister.co.uk or call 0800 408 5500. Find out more about Gas Safety Week - between 12 and 18 September - at www.gassaferegister.co.uk/learn/gas_safety_week.aspx. Please visit http://www.hse.gov.uk/gas/index.htm for more information about gas safety specifically.

Press enquiries

Regional reporters should call the appropriate Regional News Network press office.

Issued on behalf of the Health and Safety Executive by COI News & PR East