Excavator firm fined after worker's fingers severed

Date:

13 December 2010

Release No:

NE/287/10

A worker had two fingers severed when his hand was caught in the drilling machine he was operating at one of the UK's major producers of construction and mining equipment.

John Watson, 55, from Wheatley Hill, County Durham, was drilling holes in steel plates at Komatsu UK Ltd Birtley, when his right hand became caught in the rotating parts of the machine.

Mr Watson needed surgery to completely amputate his third finger and the middle finger between the first and second knuckle. He also had a bone removed from his hand. Mr Watson has worked at Komatsu for nearly twenty years but has been unable to return to work since.

Consett Magistrates' Court heard the investigation by the Health and Safety Executive (HSE), who brought the prosecution, revealed that using the drill was not part of Mr Watson's normal work but at the time of the incident he had been asked to make some storage racking for the factory.

The investigation found that at the time of the incident on 23 June 2009 there was no guard on the drill to prevent access to the rotating parts and it was not the first time the drill had been used without a guard.

The gloves that Mr Watson was wearing became entangled and drew his hand into the rotating parts. He had not received training in the use of the drill and the precautions needed to reduce the risk of entanglement.

Komatsu UK Ltd, of Durham Road, Birtley pleaded guilty of one breach of Section 2(1) of the Health and Safety at Work etc Act 1974. The company was fined £6,000 and ordered to pay costs of £3,421.10.

After the case, HSE Inspector Zoe Feather, said:

"This was an entirely preventable incident that has left Mr Watson with permanent injuries. The risks from drilling machines are well known. If a suitable guard had been fitted to the machine Mr Watson could not have become entangled.

"Also, the wearing of gloves greatly increased the risk of entanglement and was likely to have contributed to the severity of Mr Watson's injuries. The increased risk from the wearing of gloves at drilling machines is well documented.

"It is vital employers give their workers the necessary information, instruction and training in order that they understand the risks in using drilling machines and how to operate them safely."

Notes to editors

1. The Health and Safety Executive is Britain's national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice; promoting training; new or revised regulations and codes of practice; and working with local authority partners by inspection, investigation and enforcement.
2. Komatsu UK Limited pleaded guilty to breaching Section 2 (1) of the Health and Safety at Work Act etc 1974, which states: "It shall be the duty of every employer to ensure, so far as is reasonably practicable, the health, safety and welfare at work of all his employees."
3. The court also ordered Komatsu UK Limited to pay a separate £15 victim surcharge, the proceeds of which will be spent on services for victims and witnesses.

Press enquiries

Regional reporters should call the appropriate Regional News Network press office.

Issued on behalf of the HSE by COI News and PR North East