Plumber sentenced for carrying out bogus gas fitting

Date:

24 May 2010

Release No:

HSE-E-08

A plumber who illegally worked on gas boilers when unregistered in the Southend-on-Sea area has been sentenced in court.

Anthony Grove of McDivitt Walk, Leigh-on-Sea, Essex, pleaded guilty to working on a gas boiler and exposing his customers to risks at Southend Magistrates' Court.

A Health and Safety Executive (HSE) investigation found that Mr Grove, who was originally contracted to carry out plumbing work at two houses in Rayleigh and in Lovelace Gardens, Southend, between May and September 2009, had replaced old boilers at the properties after giving the owners false CORGI registration details.

The court heard how both homeowners subsequently complained about his work to Gas Safe (formerly CORGI), who alerted HSE. It was found that the work had been carried out incorrectly and that, in one case, the new installation was immediately dangerous.

Mr Grove was also found to have been employed as a gas fitter with different companies between February 2000 and February 2008, while not being registered. Immediately after the investigation started, he was served a Prohibition Notice to stop him carrying out further gas work until he could prove he was registered.

Mr Grove admitted breaching Regulation 3(3) of the Gas Safety (Installation & Use) Regulations 1998 and Section 3(2) of the Health & Safety at Work etc. Act 1974. He was fined £850 and ordered to pay £500 in costs.

HSE Inspector Steve Hook, said:

"It is illegal for an unregistered person to carry out work on a gas appliance. When unqualified workers try to bypass the law in this way they are not only putting themselves at risk of prosecution and a large fine, they are also putting their customers' lives at risk.

"Working with gas appliances is difficult, specialised and potentially very dangerous. Only qualified and registered engineers should attempt it.

"HSE will not hesitate to prosecute those who break the law in this way."

Paul Johnston, Chief Executive of Gas Safe Register added:

"If you're employing an engineer to fit, fix or service gas appliances, you should always make sure that person is Gas Safe registered. If they say they are, don't just take their word for it. Check they are on the Gas Safe Register and check their ID card when they arrive at your door. You shouldn't take any risks, badly fitted and poorly serviced gas appliances can cause fires, explosions, gas leaks and carbon monoxide poisoning."

Notes to editors

1. The Health and Safety Executive is Britain's national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice; promoting training; new or revised regulations and codes of practice; and working with local authority partners by inspection, investigation and enforcement. www.hse.gov.uk
2. Regulation 3(3) of the Gas Safety (Installation & Use) Regulations 1998 states: "No employer shall allow any of his employees to carry out any work in relation to a gas fitting or service pipework and no self-employed person shall carry out any such work, unless the employer or self-employed person, as the case may be, is a member of a class of persons approved for the time being by the Health and Safety Executive."
3. Section 3(2) of the Health & Safety at Work etc. Act 1974 states: "It shall be the duty of every self-employed person to conduct his undertaking in such a way as to ensure, so far as is reasonably practicable, that he and other persons (not being his employees) who maybe affected thereby, are not thereby exposed to risks to their health and safety."
4. Badly fitted and poorly serviced gas appliances can cause fires, explosions, gas leaks and carbon monoxide poisoning - always use a Gas Safe registered engineer to fit, fix and service gas appliances.
5. Gas Safe Register is the government approved registration scheme for gas engineers in the UK, Isle of Man and Guernsey. The register of 126,000 gas engineers, aims to protect 21 million gas consumers from dangerous gas work. It is a legal requirement for any gas engineering business or self employed gas engineer carrying out domestic or commercial gas work to be registered under the Gas Safety (Installation & Use) Regulations 1998.
6. Gas Safe Register replaced the CORGI gas registration scheme in Great Britain and Isle of Man on 1 April 2009 and in Northern Ireland and Guernsey on 1 April 2010.
7. To find or check a Gas Safe Registered engineer in your area, go to www.GasSafeRegister.co.uk or call 0800 408 5500.
8. Please visit http://www.hse.gov.uk/gas/index.htm for more information about gas safety specifically.

Press enquiries

Regional reporters should call the appropriate Regional News Network press office.

Issued on behalf of the Health and Safety Executive by COI News & PR East