Skip to content Skip to navigation

Health and Safety Executive

P - COSHH essentials for printers

files in this series:

P0 - Advice for managers [44kb]
P1 - Manual film and plate development [60kb]
P2 - Automated film and plate development [71kb]
P3 - Ink mixing [56kb]
P4 - Printing with conventional inks [60kb]
P5 - Manual cleaning of presses (conventional inks) [50kb]
P6 - Automated cleaning of presses (conventional inks) [63kb]
P7 - Printing with UV-curable inks and coatings [67kb]
P8 - Manual cleaning of presses (UV-curable inks and coatings) [66kb]
P9 - Automated cleaning of presses (UV-curable inks and coatings) [67kb]
P10 - Printing with cold-set inks [60kb]
P11 - Manual cleaning of presses (cold-set inks) [63kb]
P12 - Automated cleaning of presses (cold-set inks) [63kb]
P13 - Printing with heat-set inks [60kb]
P14 - Manual cleaning of presses (heat-set inks) [63kb]
P15 - Automated cleaning of presses (heat-set inks) [63kb]
P16 - Using isocyanate based adhesives in frame-making [142kb]
P17 - Stencil generation [71kb]
P18 - Ink mixing and colour matching [56kb]
P19 - Printing with lower-volatility inks and rack drying [61kb]
P20 - Printing with higher-volatility inks and extracted rack drying [66kb]
P21 - High-volume printing with oven drying [68kb]
P22 - Printing with UV-curable inks [64kb]
P23 - Printing with isocyanate-based inks [127kb]
P24 - Manual screen reclamation [69kb]
P25 - Automated screen reclamation [63kb]
P26 - Ink mixing [74kb]
P27 - Printing [70kb]
P28 - On-press cleaning [82kb]
P29 - Manual off-press cleaning [76kb]
P30 - Automated off-press cleaning [77kb]
P31 - Making photopolymer plates [59kb]
P32 - Mixing solvent-borne inks [75kb]
P33 - Printing with solvent-borne inks [67kb]
P34 - Mixing UV-curable inks [57kb]
P35 - Printing with UV-curable inks [69kb]
P36 - On-press cleaning [84kb]
P37 - Manual off-press cleaning [76kb]
P38 - Automated off-press [71kb]
P39 - Wide-format printing with solvent-borne inks [56kb]
P40 - Wide-format printing with UV-curable inks [61kb]
P41 - Grande-format printing [64kb]
P42 - Mixing and transferring isocyanate-based adhesives [146kb]
P43 - Using isocyanatebased adhesives [176kb]
P44 - Drying and curing isocyanate-based adhesives [135kb]
P45 - Health surveillance for occupational dermatitis [40kb]
P46 - Health surveillance for occupational asthma [39kb]
P47 - Biological monitoring for isocyanates [39kb]
P48 - Selection and use of RPE: Protection Factor 10 [44kb]
P49 - Selection and use of RPE: Protection Factor 20 [43kb]
P50 - Selection and use of RPE: Protection Factor 40 [43kb]

Related content

11.01.11